|
January 14, 2009 ( PowerHomeBiz ) -
United Kingdom
- So, you are sitting around and relaxing on a Friday night when your
electricity suddenly goes off. There are no storms outside and there were no
signs that a power outage was about to occur, so what are you supposed to do
now? Losing power can be a frustrating experience but, by taking a few
simple steps, you can isolate the problem and determine what your next step
should be.
(news continued below)
Determining the Cause of the Problem
The first step you need to take is to determine if the electrical problem
exists in your home or if you are part of a general power outage that is
affecting other people. If the outage occurs at night, you can probably
simply look around your home in order to see if your neighbor's have lost
power too. If it is during the day, on the other hand, you will need to give
one of your neighbors a call in order to see if their electricity went out
too. Another option is to check your circuit breaker main disconnect and see
if it has been tripped to the OFF position. If you are experiencing a
general power outage, you will need to simply call your power company and
let the company take care of the problem.
Dealing with a Home Power Outage
If the problem does not appear to be a general power outage, you will
need to find out what is causing the problem in your home. If the main
breaker is still in the ON position and your neighbors have power, the
problem is somewhere between your main entrance panel and your power
transmission lines. This can be caused by a number of things, including an
overloaded pole transformer or a downed service drop. In this case, the
repair is still the responsibility of the power company and you should give
the company a call.
If you have a tripped main breaker or if there is a blown main fuse, on
the other hand, the problem is actually in your house. Possible reasons for
the power outage include having a dead short somewhere in your house or
having a system overload. Both of these can be serious problems, which means
you should probably call an electrician to help you repair the problem. Or,
if you have taken the proper electrical courses, you may be able to make the
repair yourself. Either way, you should not reset the breaker. Rather, you
will need to turn off everything in the house and then start troubleshooting
the problem so you can make the necessary repairs.
Electrical Courses - Get your Part P qualification and other electrical certification and training with the Able Skills electrical course
|
